Shopping Cart Items: 0 Shopping Cart Total: 
- VJ-36
- T200 & T200+
- NJ736
- CadJet-3D
- NJ4
-
NJ36
-
Xerox 2240ij
Original OEM Drive Belt for Croma24 Printer
60 Inch Models
60 Inch Models
Actual length of belt when laid flat is roughly 46 1/2 inches
Set of (2) CAM Activators. One goes on the left end of the printer, the other goes on the right end. See Diagram.
This trailing cable is compatible with Encad Cadjet2 and Xerox 2230IJ printers. This cable is for the 36 inch models, however you can also use it on the 24 inch models. On the 24 inch models the cable will be a little longer than needed, so just take the extra cable and coil it up under the cover on the right end of the printer were the cable plugs into the main board. If you want you can place a rubber band around the coiled up cable, but this is not necessary.
Actual length of belt when laid flat is roughly 35 inches
Actual length of belt when laid flat is roughly 46 1/2 inches
Bushing Set - Fits all Encad Printers except 1000i.
Helps prevent Carriage Axis Errors
Click on details for complete installation instructions.
Drive Belt Tensioner Kit for the NJ850/880 printers which ave 8 Printheads or the NJ750 that has 4 printheads. Please Note... Encad called one of their earlier 4 printhead printers an 880. This tensioner is NOT compatible with that printer. Our other kit ( TENKIT ) is compatible with that model.
Drive Belt Tensioner Kit (Does not Fit NJ850/880 printers with 8 print heads, Nor the NJ 750 )
Replacement print head for Cadjet and Xerox 2230IJ printers.
51625A ( # 25 ) Print Head for Cajet and Xerox 2230IJ Printers
