Shopping Cart Items: 0 Shopping Cart Total: 
These Cartridges are sold empty so that they can be used with any color or style of ink.
These cartridges can be used with any of the following inks:
- GA
- GS
- GX
- GO
- GO+
- Dicojet
- or any other 3rd party inks.
When installing this cartridge fill the cartridge with roughly 25 to 30ml of ink and then screw on the bulk ink needle.
30ml Syringe with blunt needle for filling Croma 24 / NJ4 Cartridge.
Please note: It is suggested that you use a differant syringe for each color so that you do not cross contaminate the colors.
Replacement print head for Cadjet and Xerox 2230IJ printers.
51625A ( # 25 ) Print Head for Cajet and Xerox 2230IJ Printers
Used for storing print heads when not in use. Creates an air tight seal which will prevent clogging of jets in print head.
Suction Bulb for all 300dpi printer with the exception of 42e/60e/500.
This suction bulb is used for priming or unclogging a clogged print head. Simply squeeze the suction bulb and then press it up against the bottom of the print head while releasing the pressure on the bulb and this will pull the ink through the jets in the print head. This device will also help get air bubbles out of the jets to help prevent burning out the jets as a result of firing dry.
30ml Syringe with blunt needle & Tube for filling Pro Style Cartridge.
This syringe some with a small piece of tubing which can be attached the the cartridge needle in order to draw the air out of the ink line during the priming process.
It is suggested to use a differant syringe for each color of ink so that you do not cross contaminate the colors.
Easy Prime Gun for Priming Cartridges on 42e/60e/500/600/700/800 Series Printers. Helps to unclog print heads.
4 Plastic Park Pad seal Posts plus rubber washers to hold them in place
4 Wiper Blade Plastic Posts plus rubber washers to hold them in place
